A. Bayani:

Ana amfani da layin samarwa sosai a cikin nau'ikan kayan masana'antu da yawa na sarrafa kansa na kayan aiki, kayan aiki kawai suna buƙatar sanya nau'ikan kayan aiki 2 sama da nau'ikan kayan aiki 10 a cikin kowane ajiyar kayan aiki, tsarin sarrafa kwamfuta zai sanya kayan aiki daban-daban ta atomatik a cikin tsarin aunawa bisa ga rabo da aka riga aka saita, tsarin aunawa zai ƙara ta atomatik bisa ga rabo na kayan aiki na kowane kayan aiki, kowane lokacin da aka kammala kayan aiki ta hanyar bel mai jigilar kayan aiki don jigilar da kayan aiki zuwa na'urar haɗuwa don haɗuwa, haɗuwa daidai bayan sarrafawa ta atomatik

2. Abubuwa:

2.1 musamman adadin abinci hanyar, tabbatar da kayan za su iya motsa daidaito, aiki daidai ba tare da toshewa;

2.2 kayan aiki sarrafawa tsarin amfani da DCS rarrabuwa sarrafawa tsarin, babu buƙatar kiyaye high daidaito, sauri;

2.3 tsakiya sarrafawa tsarin m da kuma abin dogara, nuna intuitive, sanye da matsala ƙararrawa tsarin

2.4 samuwa tare da firintar, buga aji samar da kuma alaka data;

2.5 duk pneumatic abubuwa ne amfani da shigo da abubuwa, tabbatar da tsarin amintacce aiki;

2.6 kulawa da kuma sauƙi, dauki ƙananan yanki.

3. fasaha sigogi:

Auto kayan aiki 3 ~ 9 nau'ikan kayan aiki a kowace awa samarwa ne 10T ~ 15T / hour, kayan aiki daidaito ≤0.5%.

Auto marufi sikelin a kowace awa marufi samarwa: 12 ~ 15T / hr, marufi daidaito ≤0.2%

Amfani da wutar lantarki: 380V 50HZ; amfani da wutar lantarki: 3KW / hr

Gas tushen: 0.5Mpa Gas amfani: 0.6m3 / hr